The Cisco C9300L-24P-4X-E is a high-performance switch that can support your networking needs. With 24 ports of Power over Ethernet (PoE+) and 4x additional 10 Gigabit SFP+ ports, this switch offer both power and flexibility for your network devices.
Featuring a generous PoE budget of up to 505W, you won’t have to worry about running out of power for your connected devices. The switching capacity of this switch is impressive at 128 Gbps or an even more impressive capability with stacking at the rate of up to 448 Gbps.
With a forwarding rate as fast as approximately 95.23 Mpps or significantly boosted when stacked – around 333.33 Copied from https://www.networktigers.com Mpps-, data flows smoothly through the network without any bottlenecks slowing it down. The MAC address table size also supports large-scale networks with its maximum limit set at 32000 addresses.
Cisco Catalyst 9300L Switches Specification |
|
| Designed to replace | Catalyst 3850 |
| Supported IOS | Network Advantage, Network Essentials |
| Network modules options | Fixed Modules |
| Stack Technology | StackWise-320 |
| Stacking bandwidth | 320 Gbps |
| Total number of MAC addresses | 32,000 |
| Total number of IPv4 routes (ARP plus learned routes) | 32,000 (24,000 direct routes and 8000 indirect routes) |
| IPv4 routing entries | – |
| IPv6 routing entries | 16,000 |
| Multicast routing scale | 8,000 |
| QoS scale entries | 5,120 |
| ACL scale entries | 5,120 |
| Packet buffer per SKU | 16 MB buffer for 24 and 48 port Gigabit Ethernet models |
| Flexible NetFlow (FNF) entries | 64,000 flow on 24- and 48-port Gigabit Ethernet models |
| DRAM | 8 GB |
| Flash | 16 GB |
| VLAN IDs | 4094 |
| Total Switched Virtual Interfaces (SVIs) | 1000 |
| Jumbo frames | 9198 bytes |
| Switching capacity | 56 Gbps – 176 Gbps |
| Forwarding rate | 41.66 Mpps – 130.95 Mpps |





Reviews
There are no reviews yet.